- Locate hang tag AI file
- bentex-fs2 server > Licensing > BRANDING
- Open file in Adobe Illustrator
- Open Layers > Select layers for export > Collect for export
- Note: layers can be merged or removed beforehand if needed
- Select assets and export
- Export Settings:
- Resolution: Scale: 300 ppi
- Format: PNG
- Export > Select folder
When duplex printing with the Canon Pixma iX6820, the back side will be printed an extra 1/16" to the right, making the front and back misaligned. This is due to the 1/16" distance of the rolls in the printer.
In order to align both sides, you would need to move the back image the distance that is not aligned.
1. Open InDesign
- Note: See attachment for Document Setup
2. File > Place > Choose front side of hang tag
- (Tip: copy paste HT on Page 1 multiple times to save paper)
3. Select hang tag image(s)
- Note: To select multiple - click one, shift + click other one
4. Edit > Copy
5. Scroll to Page 2 and click on page
6. Edit > Paste in Place
- Note: You are pasting the SAME image(s) temporarily
7. On Page 2, select one of the images
- Note: If you are working with two images on Page 2, do NOT select both
8. File > Place > Open File > OK
- Note: If you are working with two images, repeat Step 6 for other image
- Tip: If you are opening a PDF, check "Show Import Options" > Open File > Select Page 2
9. Zoom in to righthand side of hang tag
10. Rectangle tool > Select black for inside and outside, double-click on screen, enter 1/16 (0.0625 in) for width and height
11. Selection Tool > Move box to rightmost edge of hang tag
- Note: Ensure that it locks into place
12. Drag ruler (located on leftmost side of screen) to be right after the box
13. Delete the box
- Note: The box was a temporary placeholder to direct you where to place the ruler
14. Zoom Out
15. Select image(s) > Shift + move image(s) on Page 2 to ruler line
16. File > Export (Adobe PDF Print) > Save > Export
